At a site, Static Cone Penetration Test was carried out. The measured point (tip) resistance was 1000 kPa at a certain depth. The friction ratio () was estimated as 1 % at the same depth.
The value of sleeve (side) friction (in kPa) at that depth was ___________________ . (in integer)
GATE CE 2022 (S1) — Question 33
Foundation EngineeringGround improvement techniquesNAT1 markEasy
A GATE question every morning
One real past-paper question every morning for your branch, answer hidden until you tap. Free on Telegram.
More on Ground improvement techniques
- GATE CE 2023 (S2) · Q18A standard penetration test (SPT) was carried out at a location by using a manually operated hammer dropping system with 50% efficiency. Th…
- GATE CE 2022 (S2) · Q31The inside diameter of a sampler tube is 50 mm. The inside diameter of the cutting edge is kept such that the Inside Clearance Ratio (ICR)…
- GATE CE 2021 (S2) · Q31The internal (d i) and external (d e) diameters of a Shelby sampler are 48 mm and 52 mm, respectively. The area ratio (A r) of the sampler…

