A square footing is to be designed to carry a column load of 500 kN which is resting on a soil stratum having the following average properties: bulk unit weight = 19 kN/m; angle of internal friction = 0° and cohesion = 25 kPa. Considering the depth of the footing as 1 m and adopting Meyerhof’s bearing capacity theory with a factor of safety of 3, the width of the footing (in m) is ___________________________ (round off to one decimal place)
[Assume the applicable shape and depth factor values as unity; ground water level at greater depth.]
GATE CE 2023 (S2) — Question 58
Foundation EngineeringShallow foundations – Terzaghi’s and Meyerhof’s bearing capacity theories, effect of water tableNAT2 marksMedium
A GATE question every morning
One real past-paper question every morning for your branch, answer hidden until you tap. Free on Telegram.
More on Shallow foundations – Terzaghi’s and Meyerhof’s bearing capacity theories, effect of water table
- GATE CE 2026 (S2) · Q44A shallow footing is subjected to a vertical load. Within the elastic limit of the underlying soil, the TRUE statement(s) is/are:
- GATE CE 2026 (S2) · Q57The ultimate bearing capacity of a 1 m wide strip footing is 532.80 kPa, when it is embedded at 1 m depth in dry cohesionless soil. The soi…
- GATE CE 2026 (S1) · Q59A shallow strip footing of width 2 m is embedded at a depth of 1.5 m below the ground surface in a homogeneous pure clay with an angle of i…
- GATE CE 2025 (S2) · Q56A designer used plate load test to obtain the value of the bearing capacity factor N . A circular plate of 1 m diameter was placed on the s…
- GATE CE 2025 (S1) · Q56A 6 m × 6 m square footing constructed in clay is subjected to a vertical load of 2500 kN at its centre. The base of the footing is 2 m bel…
- GATE CE 2024 (S2) · Q22The contact pressure distribution shown in the figure belongs to a

