A reinforced concrete beam has a support section with width of 300 mm and effective depth of 500 mm. The support section is reinforced with 3 bars of 20 mm diameter at the tension side. Two-legged vertical stirrups of 10 mm diameter and Fe415 steel at a spacing of 100 mm are provided as shear reinforcement. Assume that there is no possibility of diagonal compression failure at the section. As per IS 456:2000, the maximum shear resisted by the vertical stirrups (in kN), as per limit state design, is ___________ (round off to one decimal place).
GATE CE 2025 (S2) — Question 54
Concrete StructuresDesign and detailing of beams, slabs, columns, and isolated footingsNAT2 marksMedium
A GATE question every morning
One real past-paper question every morning for your branch, answer hidden until you tap. Free on Telegram.
More on Design and detailing of beams, slabs, columns, and isolated footings
- GATE CE 2026 (S2) · Q14A rectangular singly reinforced concrete beam has a width of 300 mm and an effective depth of 550 mm. The grades of steel and concrete are…
- GATE CE 2026 (S2) · Q51A simply-supported rectangular reinforced concrete beam has a width 250 mm and an overall depth 600 mm. The effective span of the beam is 6…
- GATE CE 2026 (S1) · Q29The required centre-to-centre spacing of 10 mm diameter bars is 150 mm to resist the design moment in a concrete slab. Instead of 10 mm dia…
- GATE CE 2025 (S2) · Q30The design shear strength of a reinforced concrete rectangular beam with a width of 250 mm and an effective depth of 500 mm, is 0.3 MPa. Th…
- GATE CE 2025 (S2) · Q40Consider a reinforced concrete beam section of 350 mm width and 600 mm depth. The beam is reinforced with the tension steel of 800 mm 2 are…
- GATE CE 2025 (S1) · Q15As per IS 456:2000 provisions for two-way slabs with continuous edges, the longitudinal steel reinforcement to be provided in the edge stri…

