An uninsulated cylindrical wire of radius 1.0 mm produces electric heating at the rate of 5.0 W/m. The temperature of the surface of the wire is 75 °C when placed in air at 25 °C. When the wire is coated with PVC of thickness 1.0 mm, the temperature of the surface of the wire reduces to 55 °C. Assume that the heat generation rate from the wire and the convective heat transfer coefficient are same for both uninsulated wire and the coated wire. The thermal conductivity of PVC is _____________ W/m.K (round off to two decimal places).
GATE ME 2021 (S1) — Question 53
Heat Transferone dimensional heat conduction, resistance concept and electrical analogy, heat transfer through finsNAT2 marksMedium
A GATE question every morning
One real past-paper question every morning for your branch, answer hidden until you tap. Free on Telegram.
More on one dimensional heat conduction, resistance concept and electrical analogy, heat transfer through fins
- GATE ME 2026 · Q43A very long fin of a uniform square cross-section is replaced by another very long fin of a uniform circular cross-section of the same mate…
- GATE ME 2024 · Q17A plane, solid slab of thickness L, shown in the figure, has thermal conductivity k that varies with the spatial coordinate x as k = A + Bx…
- GATE ME 2024 · Q48Consider a slab of 20 mm thickness. There is a uniform heat generation of q = 100 MW/m 3 inside the slab. The left and right faces of the s…
- GATE ME 2023 · Q28Consider a laterally insulated rod of length L and constant thermal conductivity. Assuming one-dimensional heat conduction in the rod, whic…
- GATE ME 2022 (S2) · Q63Consider steady state, one-dimensional heat conduction in an infinite slab of thickness 2L (L = 1 m) as shown in the figure. The conductivi…
- GATE ME 2022 (S1) · Q45Consider a rod of uniform thermal conductivity whose one end (x = 0) is insulated and the other end (x = L) is exposed to flow of air at te…

