GATE ME 2023 — Question 15

Machining and Machine Tool OperationsPrinciples of work holding, jigs and fixturesMCQ1 mark · −1/3 if wrongMedium

A cuboidal part has to be accurately positioned first, arresting six degrees of freedom and then clamped in a fixture, to be used for machining. Locating pins in the form of cylinders with hemi-spherical tips are to be placed on the fixture for positioning. Four different configurations of locating pins are proposed as shown. Which one of the options given is correct?
Question image
  1. A
    Configuration P1 arrests 6 degrees of freedom, while Configurations P2 and P4 are over-constrained and Configuration P3 is under-constrained.
  2. B
    Configuration P2 arrests 6 degrees of freedom, while Configurations P1 and P3 are over-constrained and Configuration P4 is under-constrained.
  3. C
    Configuration P3 arrests 6 degrees of freedom, while Configurations P2 and P4 are over-constrained and Configuration P1 is under-constrained.
  4. D
    Configuration P4 arrests 6 degrees of freedom, while Configurations P1 and P3 are over-constrained and Configuration P2 is under-constrained.
Practise the full 2023 paper
Challenge a friend: WhatsApp Telegram
From RENYXERAPractise this subject in the exam simulatorTimed, GATE-style tests with analytics that find your weak topics.
Practise more on Principles of work holding, jigs and fixturesTimed, in the real exam interface · free to start

A GATE question every morning

One real past-paper question every morning for your branch, answer hidden until you tap. Free on Telegram.

Join
Stuck? Ask in the student group