A weld is used for joining an angle section ISA 100 mm × 100 mm × 10 mm to a gusset plate of thickness 15 mm to transmit a tensile load. The permissible stress in the angle is 150 MPa and the permissible shear stress on the section through the throat of the fillet weld is 108 MPa. The location of the centroid of the angle is represented by in the figure, where = 28.4 mm. The area of cross-section of the angle is 1903 mm. Assuming the effective throat thickness of the weld to be 0.7 times the given weld size, the lengths and (rounded-off to the nearest integer) of the weld required to transmit a load equal to the full strength of the tension member are, respectively


- A541 mm and 214 mm
- B214 mm and 541 mm
- C380 mm and 151 mm
- D151 mm and 380 mm

