The following consecutive readings (in m) were taken with a dumpy level and a levelling staff at a common interval of 20 m:
0.385; 1.030; 1.925; 2.825; 3.730; 4.850; 1.045; 2.005; 3.330; 4.580
The dumpy level was shifted after taking the sixth reading.
The gradient (in %) of the ground between the first and the last location of the reading is ______ (in integer).
GATE CE 2026 (S1) — Question 62
SurveyingDistance and angle measurement – Levelling and trigonometric levellingNAT2 marksMedium
A GATE question every morning
One real past-paper question every morning for your branch, answer hidden until you tap. Free on Telegram.
More on Distance and angle measurement – Levelling and trigonometric levelling
- GATE CE 2026 (S2) · Q26Which one of the following statements is TRUE with respect to levelling survey?
- GATE CE 2026 (S2) · Q41For the traverse given below, the benchmark is at ground point L. The Reduced Level (RL) of L is 150.000 m. The direction of the traverse i…
- GATE CE 2026 (S1) · Q34A 30 m long tape is standardized at 25 . It was used to measure the length of a line which came out to be 200 m. The temperature during the…
- GATE CE 2026 (S1) · Q35The height of the plane of collimation of a levelling instrument is 100.000 m from a datum. The levelling instrument measures a Back Sight…
- GATE CE 2026 (S1) · Q43Locations P and Q are separated by a wide valley. The difference in levels of locations P and Q measured by a levelling instrument statione…
- GATE CE 2025 (S1) · Q26If the horizontal distance between a staff point and the point of observation is d, the error due to the curvature of earth is proportional…

