The instruction pipeline of a RISC processor has the following stages: Instruction Fetch (IF), Instruction Decode (ID), Operand Fetch (OF), Perform Operation (PO) and Writeback (WB). The IF, ID, OF and WB stages take 1 clock cycle each for every instruction. Consider a sequence of 100 instructions. In the PO stage, 40 instructions take 3 clock cycles each, 35 instructions take 2 clock cycles each, and the remaining 25 instructions take 1 clock cycle each. Assume that there are no data hazards and no control hazards.
The number of clock cycles required for completion of execution of the sequence of instructions is ______.
GATE CS 2018 (Forenoon) — Question 60
Computer Organization and Architecture (COA)Instruction Pipelining, Performance, Hazard ManagementNAT2 marksMedium
A GATE question every morning
One real past-paper question every morning for your branch, answer hidden until you tap. Free on Telegram.
More on Instruction Pipelining, Performance, Hazard Management
- GATE CS 2026 (Forenoon) · Q16Which one of the following dependencies among the register operands of different instructions can cause a data hazard in a pipelined proces…
- GATE CS 2026 (Forenoon) · Q60The EX stage of a pipelined processor performs the memory read operations for LOAD instructions, and the operations for the arithmetic and…
- GATE CS 2026 (Afternoon) · Q57A non-pipelined instruction execution unit that operates at 1.6 GHz clock takes an average of 5 clock cycles to complete the execution of a…
- GATE CS 2025 (Afternoon) · Q56A 5-stage instruction pipeline has stage delays of 180, 250, 150, 170, and 250, respectively, in nanoseconds. The delay of an inter-stage l…
- GATE CS 2025 (Afternoon) · Q61An application executes 6.4 10 8 number of instructions in 6.3 seconds. There are four types of instructions, the details of which are give…
- GATE CS 2024 (Forenoon) · Q30Consider a 5-stage pipelined processor with Instruction Fetch (IF), Instruction Decode (ID), Execute (EX), Memory Access (MEM), and Registe…

