Subject analysis · 2017–2026

Computer Organization and Architecture (COA)

Every GATE CS question on Computer Organization and Architecture (COA), with how the marks are spread across years and topics.

Practise Computer Organization and Architecture (COA)

Questions

72

6 topics

Avg marks / year

11.5

115 marks over 10 years

Peak year

2025

18 marks

Trend

Rising

+93% last 3 yrs

Marks per year

Both shifts counted where there were two · peak highlighted

Rising +93%
avg 11.5
16
9
3
9
13
7
6
16
18
18
'17'18'19'20'21'22'23'24'25'26

Topic share

Share of Computer Organization and Architecture (COA)'s 115 marks

6

topics

  • Memory Hierarchy41%
  • Instruction Pipelining, Performance, Hazard Management24%
  • Machine Instructions & Addressing Modes21%
  • I/O Interfaces8%
  • ALU, Control Unit Design, Data-Path Operations3%
  • Main Memory & Virtual Memory Mechanics3%

Topic × year heatmap

Marks from each topic in each year — darker is heavier. Topics that light up every column are the safest bets.

'17'18'19'20'21'22'23'24'25'26
Memory Hierarchy11233442486
Instruction Pipelining, Performance, Hazard Management222421645
Machine Instructions & Addressing Modes32242434
I/O Interfaces11111211
ALU, Control Unit Design, Data-Path Operations112
Main Memory & Virtual Memory Mechanics12
Recommended book · affiliate linkComputer Organization and Design (Patterson & Hennessy)Pipelining, caches, memory hierarchy and instruction sets.

All 72 Computer Organization and Architecture (COA) questions

2026 11 questions · 18 marks
  1. FN · Q14Match each addressing mode in List I with a data element or an element of a data structure (in a high-level language) in List II : List I P. Immediate Q. Indir…Machine Instructions & Addressing Modes · MCQ · 1 mark
  2. FN · Q15Consider a processor P whose instruction set architecture is the load-store architecture. The instruction format is such that the first operand of any instruct…Machine Instructions & Addressing Modes · MCQ · 1 mark
  3. FN · Q16Which one of the following dependencies among the register operands of different instructions can cause a data hazard in a pipelined processor?Instruction Pipelining, Performance, Hazard Management · MCQ · 1 mark
  4. FN · Q38The size of the physical address space of a processor is 2 32 bytes. The capacity of a cache memory unit is 2 23 bytes. The cache block size is 128 bytes. The…Memory Hierarchy · MCQ · 2 marks
  5. FN · Q54Consider a system that has a cache memory unit and a memory management unit (MMU). The address input to the cache memory is a physical address. The MMU has a t…Main Memory & Virtual Memory Mechanics · MSQ · 2 marks
  6. FN · Q60The EX stage of a pipelined processor performs the memory read operations for LOAD instructions, and the operations for the arithmetic and logic instructions.…Instruction Pipelining, Performance, Hazard Management · NAT · 2 marks
  7. AN · Q18Consider the following two statements about interrupt handling mechanisms in a CPU. S1: In non-vectored interrupt mechanism, it usually takes more time to star…I/O Interfaces · MCQ · 1 mark
  8. AN · Q44Consider a processor that has 16 general purpose registers and it uses 2-byte instruction format for all its instructions. Variable-sized opcodes are permitted…Machine Instructions & Addressing Modes · MCQ · 2 marks
  9. AN · Q52Consider a system with a processor and a 4 KB direct mapped cache with block size of 16 bytes. The system has a 16 MB physical memory. Four words P, Q, R, and…Memory Hierarchy · MSQ · 2 marks
  10. AN · Q56Consider a system with 1 MB physical memory and a word length of 1 byte. The system uses a direct mapped cache, with block numbers starting from 0. The word wi…Memory Hierarchy · NAT · 2 marks
  11. AN · Q57A non-pipelined instruction execution unit that operates at 1.6 GHz clock takes an average of 5 clock cycles to complete the execution of an instruction. To im…Instruction Pipelining, Performance, Hazard Management · NAT · 2 marks
2025 11 questions · 18 marks
  1. FN · Q11Suppose a program is running on a non-pipelined single processor computer system. The computer is connected to an external device that can interrupt the proces…I/O Interfaces · MCQ · 1 mark
  2. FN · Q27A partial data path of a processor is given in the figure, where RA, RB, and RZ are 32-bit registers. Which option(s) is/are CORRECT related to arithmetic oper…ALU, Control Unit Design, Data-Path Operations · MSQ · 1 mark
  3. FN · Q36Consider a memory system with 1 M bytes of main memory and 16 K bytes of cache memory. Assume that the processor generates 20-bit memory address, and the cache…Memory Hierarchy · MCQ · 2 marks
  4. FN · Q37A processor has 64 general-purpose registers and 50 distinct instruction types. An instruction is encoded in 32-bits. What is the maximum number of bits that c…Machine Instructions & Addressing Modes · MCQ · 2 marks
  5. FN · Q53A computer has a memory hierarchy consisting of two-level cache (L1 and L2) and a main memory. If the processor needs to access data from memory, it first look…Memory Hierarchy · NAT · 2 marks
  6. AN · Q28Which of the following is/are part of an Instruction Set Architecture of a processor?Machine Instructions & Addressing Modes · MSQ · 1 mark
  7. AN · Q32The following two signed 2's complement numbers (multiplicand M and multiplier Q) are being multiplied using Booth's algorithm: M : 1100 1101 1110 1101 and Q:…ALU, Control Unit Design, Data-Path Operations · NAT · 1 mark
  8. AN · Q39For a direct-mapped cache, 4 bits are used for the tag field and 12 bits are used to index into a cache block. The size of each cache block is one byte. Assume…Memory Hierarchy · MCQ · 2 marks
  9. AN · Q55Given a computing system with two levels of cache (L1 and L2) and a main memory. The first level (L1) cache access time is 1 nanosecond (ns) and the “hit rate”…Memory Hierarchy · NAT · 2 marks
  10. AN · Q56A 5-stage instruction pipeline has stage delays of 180, 250, 150, 170, and 250, respectively, in nanoseconds. The delay of an inter-stage latch is 10 nanosecon…Instruction Pipelining, Performance, Hazard Management · NAT · 2 marks
  11. AN · Q61An application executes 6.4 10 8 number of instructions in 6.3 seconds. There are four types of instructions, the details of which are given in the table. The…Instruction Pipelining, Performance, Hazard Management · NAT · 2 marks
2024 10 questions · 16 marks
  1. FN · Q15Which one of the following statements is FALSE?I/O Interfaces · MCQ · 1 mark
  2. FN · Q30Consider a 5-stage pipelined processor with Instruction Fetch (IF), Instruction Decode (ID), Execute (EX), Memory Access (MEM), and Register Writeback (WB) sta…Instruction Pipelining, Performance, Hazard Management · MSQ · 1 mark
  3. FN · Q53Consider two set-associative cache memory architectures: WBC , which uses the write back policy, and WTC , which uses the write through policy. Both of them us…Memory Hierarchy · MSQ · 2 marks
  4. FN · Q55The baseline execution time of a program on a 2 GHz single core machine is 100 nanoseconds (ns). The code corresponding to 90% of the execution time can be ful…Instruction Pipelining, Performance, Hazard Management · NAT · 2 marks
  5. FN · Q56A given program has 25% load/store instructions. Suppose the ideal CPI (cycles per instruction) without any memory stalls is 2. The program exhibits 2% miss ra…Memory Hierarchy · NAT · 2 marks
  6. AN · Q11Consider a computer with a 4 MHz processor. Its DMA controller can transfer 8 bytes in 1 cycle from a device to main memory through cycle stealing at regular i…I/O Interfaces · MCQ · 1 mark
  7. AN · Q31An instruction format has the following structure: Instruction Number: Opcode destination reg, source reg-1, source reg-2 Consider the following sequence of in…Instruction Pipelining, Performance, Hazard Management · MSQ · 1 mark
  8. AN · Q57A processor with 16 general purpose registers uses a 32-bit instruction format. The instruction format consists of an opcode field, an addressing mode field, t…Machine Instructions & Addressing Modes · NAT · 2 marks
  9. AN · Q58A non-pipelined instruction execution unit operating at 2GHz takes an average of 6 cycles to execute an instruction of a program P. The unit is then redesigned…Instruction Pipelining, Performance, Hazard Management · NAT · 2 marks
  10. AN · Q61A processor uses a 32-bit instruction format and supports byte-addressable memory access. The ISA of the processor has 150 distinct instructions. The instructi…Machine Instructions & Addressing Modes · NAT · 2 marks
2023 4 questions · 6 marks
  1. FN · Q33Consider a 3-stage pipelined processor having a delay of 10 ns (nanoseconds), 20 ns, and 14 ns, for the first, second, and the third stages, respectively. Assu…Instruction Pipelining, Performance, Hazard Management · NAT · 1 mark
  2. FN · Q34A keyboard connected to a computer is used at a rate of 1 keystroke per second. The computer system polls the keyboard every 10 ms (milli seconds) to check for…I/O Interfaces · NAT · 1 mark
  3. FN · Q41Consider the given C-code and its corresponding assembly code, with a few operands U1–U4 being unknown. Some useful information as well as the semantics of eac…Machine Instructions & Addressing Modes · MCQ · 2 marks
  4. FN · Q64An 8-way set associative cache of size 64 KB (1 KB = 1024 bytes) is used in a system with 32-bit address. The address is sub-divided into TAG, INDEX, and BLOCK…Memory Hierarchy · NAT · 2 marks
2022 5 questions · 7 marks
  1. FN · Q17Which one of the following facilitates transfer of bulk data from hard disk to main memory with the highest throughput?I/O Interfaces · MCQ · 1 mark
  2. FN · Q24Let WB and WT be two set associative cache organizations that use LRU algorithm for cache block replacement. WB is a write back cache and WT is a write through…Memory Hierarchy · MSQ · 1 mark
  3. FN · Q33A cache memory that has a hit rate of 0.8 has an access latency 10 ns and miss penalty 100 ns. An optimization is done on the cache to reduce the miss rate. Ho…Memory Hierarchy · NAT · 1 mark
  4. FN · Q54Consider a system with 2 KB direct mapped data cache with a block size of 64 bytes. The system has a physical address space of 64 KB and a word length of 16 bi…Memory Hierarchy · MSQ · 2 marks
  5. FN · Q61A processor X 1 operating at 2 GHz has a standard 5-stage RISC instruction pipeline having a base CPI (cycles per instruction) of one without any pipeline haza…Instruction Pipelining, Performance, Hazard Management · NAT · 2 marks
2021 8 questions · 13 marks
  1. FN · Q32Consider a computer system with a byte-addressable primary memory of size 2 32 bytes. Assume the computer system has a direct-mapped cache of size 32 KB (1 KB…Memory Hierarchy · NAT · 1 mark
  2. FN · Q63A five-stage pipeline has stage delays of 150, 120, 150, 160 and 140 nanoseconds. The registers that are used between the pipeline stages have a delay of 5 nan…Instruction Pipelining, Performance, Hazard Management · NAT · 2 marks
  3. FN · Q65Consider the following instruction sequence where registers R1, R2 and R3 are general purpose and MEMORY[X] denotes the content at the memory location X. Assum…Machine Instructions & Addressing Modes · NAT · 2 marks
  4. AN · Q29Consider a set-associative cache of size 2 KB (1 KB = 2 10 bytes) with cache block size of 64 bytes. Assume that the cache is byte-addressable and a 32-bit add…Memory Hierarchy · NAT · 1 mark
  5. AN · Q30Consider a computer system with DMA support. The DMA module is transferring one 8-bit character in one CPU cycle from a device to memory through cycle stealing…I/O Interfaces · NAT · 1 mark
  6. AN · Q37Assume a two-level inclusive cache hierarchy, L1 and L2, where L2 is the larger of the two. Consider the following statements. S 1 : Read misses in a write thr…Memory Hierarchy · MCQ · 2 marks
  7. AN · Q54If the numerical value of a 2-byte unsigned integer on a little endian computer is 255 more than that on a big endian computer, which of the following choices…Machine Instructions & Addressing Modes · MSQ · 2 marks
  8. AN · Q63Consider a pipelined processor with 5 stages. Instruction Fetch (IF), Instruction Decode (ID), Execute (EX), Memory Access (MEM), and Write Back (WB). Each sta…Instruction Pipelining, Performance, Hazard Management · NAT · 2 marks
2020 6 questions · 9 marks
  1. FN · Q13Consider the following statements: I. Daisy chaining is used to assign priorities in attending interrupts. II. When a device raises a vectored interrupt, the C…I/O Interfaces · MCQ · 1 mark
  2. FN · Q14Consider the following data path diagram. Consider an instruction: R0 R1 + R2. The following steps are used to execute it over the given data path. Assume that…ALU, Control Unit Design, Data-Path Operations · MCQ · 1 mark
  3. FN · Q31A direct mapped cache memory of 1 MB has a block size of 256 bytes. The cache has an access time of 3 ns and a hit rate of 94%. During a cache miss, it takes 2…Memory Hierarchy · NAT · 1 mark
  4. FN · Q40A computer system with a word length of 32 bits has a 16 MB byte-addressable main memory and a 64 KB, 4-way set associative cache memory with a block size of 2…Memory Hierarchy · MCQ · 2 marks
  5. FN · Q53Consider a non-pipelined processor operating at 2.5 GHz. It takes 5 clock cycles to complete an instruction. You are going to make a 5-stage pipeline out of th…Instruction Pipelining, Performance, Hazard Management · NAT · 2 marks
  6. FN · Q54A processor has 64 registers and uses 16-bit instruction format. It has two types of instructions: I-type and R-type. Each I-type instruction contains an opcod…Machine Instructions & Addressing Modes · NAT · 2 marks
2019 2 questions · 3 marks
  1. FN · Q11A certain processor uses a fully associative cache of size 16 kB. The cache block size is 16 bytes. Assume that the main memory is byte addressable and uses a…Memory Hierarchy · MCQ · 1 mark
  2. FN · Q55A certain processor deploys a single-level cache. The cache block size is 8 words and the word size is 4 bytes. The memory system uses a 60 MHz clock. To servi…Memory Hierarchy · NAT · 2 marks
2018 6 questions · 9 marks
  1. FN · Q15Consider the following processor design characteristics. I. Register-to-register arithmetic operations only II. Fixed-length instruction format III. Hardwired…ALU, Control Unit Design, Data-Path Operations · MCQ · 1 mark
  2. FN · Q19The following are some events that occur after a device controller issues an interrupt while process L is under execution. (P) The processor pushes the process…I/O Interfaces · MCQ · 1 mark
  3. FN · Q33A 32-bit wide main memory unit with a capacity of 1 GB is built using 256M 4-bit DRAM chips. The number of rows of memory cells in the DRAM chip is 2 14 . The…Main Memory & Virtual Memory Mechanics · NAT · 1 mark
  4. FN · Q44The size of the physical address space of a processor is 2 P bytes. The word length is 2 W bytes. The capacity of cache memory is 2 N bytes. The size of each c…Memory Hierarchy · MCQ · 2 marks
  5. FN · Q60The instruction pipeline of a RISC processor has the following stages: Instruction Fetch (IF), Instruction Decode (ID), Operand Fetch (OF), Perform Operation (…Instruction Pipelining, Performance, Hazard Management · NAT · 2 marks
  6. FN · Q61A processor has 16 integer registers (R0, R1, .. , R15) and 64 floating point registers (F0, F1,… , F63). It uses a 2-byte instruction format. There are four c…Machine Instructions & Addressing Modes · NAT · 2 marks
2017 9 questions · 16 marks
  1. FN · Q11Consider the C struct defined below: c struct data int marks [100]; char grade; int cnumber; ; struct data student; The base address of student is available in…Machine Instructions & Addressing Modes · MCQ · 1 mark
  2. FN · Q25Consider a two-level cache hierarchy with L 1 and L 2 caches. An application incurs 1.4 memory accesses per instruction on average. For this application, the m…Memory Hierarchy · NAT · 1 mark
  3. FN · Q49Consider a RISC machine where each instruction is exactly 4 bytes long. Conditional and unconditional branch instructions use PC-relative addressing mode with…Machine Instructions & Addressing Modes · NAT · 2 marks
  4. FN · Q50Instruction execution in a processor is divided into 5 stages. Instruction Fetch (IF), Instruction Decode (ID), Operand Fetch (OF), Execute (EX) and Write Back…Instruction Pipelining, Performance, Hazard Management · NAT · 2 marks
  5. FN · Q51Consider a 2-way set associative cache with 256 blocks and uses LRU replacement. Initially the cache is empty. Conflict misses are those misses which occur due…Memory Hierarchy · NAT · 2 marks
  6. FN · Q54A cache memory unit with capacity of N words and block size of B words is to be designed. If it is designed as a direct mapped cache, the length of the TAG fie…Memory Hierarchy · NAT · 2 marks
  7. AN · Q29In a two-level cache system, the access times of L 1 and L 2 caches are 1 and 8 clock cycles, respectively. The miss penalty from the L 2 cache to main memory…Memory Hierarchy · MCQ · 2 marks
  8. AN · Q45The read access times and the hit ratios for different caches in a memory hierarchy are as given below. The read access time of main memory is 90 nanoseconds.…Memory Hierarchy · NAT · 2 marks
  9. AN · Q53Consider a machine with a byte addressable main memory of 2 32 bytes divided into blocks of size 32 bytes. Assume that a direct mapped cache having 512 cache l…Memory Hierarchy · NAT · 2 marks