Consider a non-pipelined processor operating at 2.5 GHz. It takes 5 clock cycles to complete an instruction. You are going to make a 5-stage pipeline out of this processor. Overheads associated with pipelining force you to operate the pipelined processor at 2 GHz. In a given program, assume that 30% are memory instructions. 60% are ALU instructions and the rest are branch instructions. 5% of the memory instructions cause stalls of 50 clock cycles each due to cache misses and 50% of the branch instructions cause stalls of 2 cycles each. Assume that there are no stalls associated with the execution of ALU instructions. For this program, the speedup achieved by the pipelined processor over the non-pipelined processor (round off to 2 decimal places) is ________.
GATE CS 2020 (Forenoon) — Question 53
Computer Organization and Architecture (COA)Instruction Pipelining, Performance, Hazard ManagementNAT2 marksHard
A GATE question every morning
One real past-paper question every morning for your branch, answer hidden until you tap. Free on Telegram.
More on Instruction Pipelining, Performance, Hazard Management
- GATE CS 2026 (Forenoon) · Q16Which one of the following dependencies among the register operands of different instructions can cause a data hazard in a pipelined proces…
- GATE CS 2026 (Forenoon) · Q60The EX stage of a pipelined processor performs the memory read operations for LOAD instructions, and the operations for the arithmetic and…
- GATE CS 2026 (Afternoon) · Q57A non-pipelined instruction execution unit that operates at 1.6 GHz clock takes an average of 5 clock cycles to complete the execution of a…
- GATE CS 2025 (Afternoon) · Q56A 5-stage instruction pipeline has stage delays of 180, 250, 150, 170, and 250, respectively, in nanoseconds. The delay of an inter-stage l…
- GATE CS 2025 (Afternoon) · Q61An application executes 6.4 10 8 number of instructions in 6.3 seconds. There are four types of instructions, the details of which are give…
- GATE CS 2024 (Forenoon) · Q30Consider a 5-stage pipelined processor with Instruction Fetch (IF), Instruction Decode (ID), Execute (EX), Memory Access (MEM), and Registe…

