In an arc welding process, the voltage and current are 30 V and 200 A, respectively. The cross-sectional area of the joint is 20 mm and the welding speed is 5 mm/s. The heat required to melt the material is 20 J/s. The percentage of heat lost to the surrounding during the welding process is _________ (rounded off to 2 decimal places).
GATE ME 2024 — Question 63
Casting, Forming and Joining ProcessesPrinciples of welding, brazing, solderingNAT2 marksMedium
A GATE question every morning
One real past-paper question every morning for your branch, answer hidden until you tap. Free on Telegram.
More on Principles of welding, brazing, soldering
- GATE ME 2024 · Q32The most suitable electrode material used for joining low alloy steels using Gas Metal Arc Welding (GMAW) process is
- GATE ME 2022 (S2) · Q57In a direct current arc welding process, the power source has an open circuit voltage of 100 V and short circuit current of 1000 A. Assume…
- GATE ME 2022 (S1) · Q57Two mild steel plates of similar thickness, in butt-joint configuration, are welded by gas tungsten arc welding process using the following…
- GATE ME 2021 (S2) · Q48A spot welding operation performed on two pieces of steel yielded a nugget with a diameter of 5 mm and a thickness of 1 mm. The welding tim…
- GATE ME 2021 (S1) · Q47The resistance spot welding of two 1.55 mm thick metal sheets is performed using welding current of 10000 A for 0.25 s. The contact resista…

